-
The SF-180 is a high-speed automatic stitching wire flattening and coiling machine for converting round galvanized or copper-coated steel wire into flat stitching wire coils for corrugated carton and box stitching applications.
It combines wire flattening and flat-wire coiling in one machine, together with preset-length control, servo-controlled traverse winding, automatic tying and automatic coil discharge.
Typical production performance is 30–40 finished 2.5 kg coils per hour, equivalent to approximately 75–100 kg/hour depending on wire size, finished flat-wire dimensions, material condition and operating settings.
-
The CO2 gas welding process route:
1 raw materials (Ф5.5 mm or Ф6.5 mm )→ steel pretreatment (including pay-off stand + machine shell+water cleaning + electrolytic pickling + high-frequency drying + cold wind dried) →LZ7/560 straight line drawing machine→SG800 h-wheel take-up machines
2 FX800 h-wheel pay-off machines→LZ8/400(or LZ7/400 or LZ6/400) straight line drawing machine →tension frame →cleaning trough→SG630 h-wheel take-up machines
3 FX630 pay-off machine→self-adjust tensile pay-off stand→steel roller bogie→hot scrub→electrolysis alkali bath→neutralization after alkali→electrolytic pickling tank→cleaning and activation tank→chemical coating bath→water wash neutralization→hot water washing electrical heating drying→bogie→tractor →SG630 H-Wheel take-up machine
4 SG630 h-wheel pay-off machine→ tensile rack→wire winding(into each coil to 15Kg or 20Kg)
5 BS4525 heat shrinkable packer for packaging, storage
-
This machine is to remove the rust on the surface of wire rod, motor driven screws are set for easy movement of bending rollers to treat with bigger diameter wire rod.
-
The material is from wire drawing machine (steel bobbin) and after this machine can make the package 25kgs coil or basket spool.
-
This type of Semi-Auto Respooling Machine mainly used for CO2 welding wire precision layer winding.
-
The wire material: co2 welding wire, FCW welding wire, Aluminum welding wire,
The wire diameter range: 0.8mm to 1.6mm
-
-
-
Pay off as drawing machine matching equipment, mainly used to start wire feeding before wire drawing procedure, there’re a variety of pay off machines for your choice such as spooler pay off, over-head pay off, horizontal spin pay off and duck-nip type pay off and so on, can be realized non-stop working during wire feeding…
-
High-Speed Double Head design for perfect abrasive sanding at speeds up to 5.0 m/s. SBH descalers are designed for low, medium, high carbon and stainless-steel rod. Rod inlet diameter from 4.75 up to 12mm. ———————— For cleaning sanding or removing surface defects by means of 2 sanding belts as well as optionally by means of…
-
Product Name:Wire drawing machine Transmission: by gearbox or by belt Drawing die: pressure die or rotating die Die cooling system: direct cooling Capstan cooling: water cooling and fan cooling ———————— This wire drawing machine is also called Straight line drawing machine, is widely used in high carbon steel wire (SAE1060, SAE1072, SAE1072, SAW1080, SAE1082) or…
