WIRE MECHANICAL DESCALING MACHINE
This machine is to remove the rust on the surface of wire rod, motor driven screws are set for easy movement of bending rollers to treat with bigger diameter wire rod.
Description
Reversed Bending Descaler for wire drawing prepration process
The structure of the bending unit adopts a carbide wheel and a curved S-shaped flat surface to mechanically deform the wire, remove the scale, and remove large oxide scales on the surface. The brush row adopts a 90° two-way installation wire brush rotating cylinder structure, and the two bodies are connected in series. Used to remove the remaining tiny oxide particles on the surface of the steel wire after mechanical shelling. They are driven in forward and reverse directions by two 1.5KW-6-pole motors respectively. The working pressure of the brushing machine is sleeplessly regulated by the speed of the motor. A broken wire detection switch is installed at the outlet of the shelling and brushing machine. Once the wire is in the shelling and brushing machine in case of internal wire breakage, the wire breakage switch will operate and the Descaling Machine will automatically stop, minimizing the trouble of re-threading the wire in the pretreatment line.
Bend descaler, Mechanical descaling machine
This machine is to remove the rust on the surface of wire rod, motor driven screws are set for easy movement of bending rollers to treat with bigger diameter wire rod.
Descaler roller Diameter 140mm
Descaler roller No. 3+3
Max. inlet Dia.: Φ10mm
Bending Motor power: 0.55KW X2
Bending roller Transmission: By worm reducer
MECHANICAL DESCALERS
•Mechanical bending and abrasion descaling system eliminates the polluting acids of chemical type descalers.
•Elimination of acid handling equipment makes the descaling unit much smaller than acid bath types.
•Running costs are greatly reduced by using rollers and replaceable brushes instead of acids.
•Scale handling is easier and the environment is cleaner because removed scale stays inside the descaler. (Optional vacuum scale accumulator avaliable.)
•Descalers can be integrated into drawing lines to eliminate the need for wire handling between descaling and drawing processes. One-person operation.
•Descalers are avaliable with either borax or lime coating and drying units.
•Straight through, L-turn, and U-turn arrangements are avaliable to match your on-site needs.
Compact space compared with acid pickiling line
High productivity with inlined drawing machine
Common base for bending unit & brushing unit enables easy installment
Scale collecting designing within this unit.
*Applicable scale vacuum collector (Option)
