Description
The main technical specification.
Name | Type and specification |
Equipment | Payoff Stand + LT(1+17)/350-4T wet drawing M/C+GS400 spooling take up M/C; Shaft of cone(4pcs) + traction wheel shaft(1pc) + spooling takup M/C; horizontal collocation. |
Raw material | High and middle carbon steel ( 45#; 60#; 70#; 80# ) |
Inlet diameter | 2.5mm—2.2mm—1.8mm ( 1100Mpa) – phosphorated wire. |
Final products diameter | 0.8mm—0.5mm—0.4mm (2200 Mpa) |
Passive payoff stand | Rod specification |
Die arrangement | To be equiped one set of die per machine ( 1 set = 18 pieces ) |
Speed/ direction | 600m/ min ( 10m/s 60HZ ) left >>>> right |
Total compression ratio | 94.80% |
Average compression ratio | 15.20% |
Cone collocation | 8 trough/ 8 trough + 8 trough/ 8 trough |
Cone/ traction whill Body | is 45# forged steel. Coated by WC, coaxio degrees ≤ 0.025 can use for 22000 hours |
Motor | The motor of drawing M/C is Y2VP-45KW-4P electric motor with invertor. |
The traverse motor | is Y2VP-0.55KW-4P electric motor with invertor. |
The Takeup motor | is Y2VP-7.5KW-4P electric motor with invertor. |
Driven | Imported synchronnization belt and narrow “V” type belt is adopted by main machine, itcan redue the noise, the noise is nor more than 80Db. |
The motor with inverter | are adopted by main machine and take up machine and these motors are fixed on one steel plate. Thay can reduce the shock when the motor started. |
The main transmission parts | should be balanced, |
Cooling for drawing machine | The die of out M/C, 1# dry-drawing die is adopted cycle water cooling |
The die of inner M/C | are adopted by all-immersing type and oil-injection type. When the machine is working, the die will be immersed in lubrication and when the wire goes in to the die, the oil-injiection type is adopted. |
The die size | Φ 28*15 |
Cooling | for cone-shaped wheel and traction wheel Cooling for cone-shaped wheel is adopted by immersing type. The traction wheel cooling is adopted by cycle water cooling |
Lubricant | The pressure source of lubrication and cooling is from out of M/C and provided together. |
The lubricant and cooling water | is circular used which is out of M/C. |
Die arrangement Out of drawing M/C | inlet 1# dry-drawing die. |
Inner drawing M/C | NO.02#_09#the first line die holder |
NO.10#_17# | the second line die holder |
NO.18# die | X-Y moving, the die can be adjusted. |
Dancer wheel Fixed | wheel group ( 04 pcs), dancer-wheel group (03 pcs). |
Take-up 400 spooling take up machine , loading and un loading | is controlled by pneumatic. |
Spool size 400mm spooling weight | 45kg/spool |
Traverse | The screw traverse is adopted by traverse, controlled by knob |
Straightener | 14-wheels straightener is adopted. |
Size and weight Length | 6500mm x width 1500mm x height 2000mm |
Weight | 5000kg/set |
II- The electric control of the equipment.
a. The electric control systemis composed of AC inverter; PLC: machine interface;constant tension.
b. The electric control system is digital electronics system, the system has a funtion that reserves the extension; the control performance is very higher and anti-jamming is perfect.
c. The electric control system is composed of main electric cabinet ( included touch-screen panel ) and takes up operation panel. The electric cabinet is fixed upon of drawing M/C. The operation and maintenance is very convenient. The component of electric control is famous brands and has good quality. The electric motor with invertor made by HENG DA and HUI CHUAN. The points of contact to wire made by especail material, hardness > HRC58. All electronic products assembled with the machine have a two-year guarantee.
d. The system inpection and mainenance: Tension inspection, broken-wire inspection, count-meter and coun-weight tensionframe sensor, inverter trouble inspection and etc…
e. The function setting:
The machine has function as follows | foot-switch/broken-wire ispection/tension adjustment/the lubrication cooling watwer adjustment/ alarm light ect…. |
The function of operation panel | Start/stop speed adjusment/ trouble indication/ reset/ count-meter indication/reset. |
The function of touch sceen | Length pre-setting/ speed pre-setting/ speed setting/ length setting/ working speed display/ trouble display/ PLC-I/O display/ motor monitoring and equipment state monitoring display. The informations can be amended and setup. |
The electric control and configuration | |
AC inverter | An Chuan or Mitsubishi-Japan |
PLC | SIEMENS-200 Germany |
Touch-screen | 15inch SIEMENS-Germany |
Sensor | LANBAO |
Low voltage component | Schneider-France |
Proximity switch | Oumou-Japan |
Electric motor whith inveter | Heng Da. |
Reviews
There are no reviews yet.